CGI Windows & Doors in Pompano Beach, FL

CGI Windows & Doors in Pompano Beach, FL | Sightline Windows & Doors Lighthouse Point

CGI impact window and door service in Pompano Beach typically runs $180-$420 for hardware and roller repairs, while full-frame replacement of a standard single hung starts around $890-$1,400 per opening depending on size and HVHZ permit requirements. We’re an independent service provider offering our Window Replacement in Pompano Beach, not a CGI-authorized dealer, and we’ve installed and repaired their product lines across Pompano Beach since 2012. Call (754) 600-8907 to schedule your free measured survey and written estimate.

Call (754) 600-8907

Why Pompano Beach Residents Choose Us for CGI Service

We know CGI’s product lines because we see them constantly in Pompano Beach’s coastal housing stock, not because of a dealer certificate on the wall. Our technicians carry the Broward County licenses and wind-load engineering data required to pull HVHZ permits here, where the certification threshold is stricter than across the county line in Palm Beach County.

Sonia Raman, who leads our crew, grew up in Miami and studied building construction technology at Miami Dade College before spending the better part of two decades measuring, fitting, and finishing windows and doors across South Florida. She’s worked canal-front properties near the Lighthouse Point Marina where salt air and storm exposure make product selection genuinely consequential. That field experience shapes how we quote CGI work in Pompano Beach. We don’t guess at frame conditions or rough-opening dimensions. We measure, document, and write the price before any deposit changes hands. Measure twice, write it down, then we talk price.

Our CGI sales & service covers everything from roller replacement on Series 8000 horizontal rollers to full-frame removal of corroded early-generation units. Every job leaves a documented photo record and carries our 365-Day Done Right Promise under the Haven Standard.

Common CGI Windows & Doors Problems We Solve in Pompano Beach

• Roller failure on CGI Series 8000 horizontal rollers. The nylon rollers flat-spot and the aluminum track pits from salt air exposure in Intracoastal-adjacent Pompano Beach blocks. Windows bind, jump the track, or require two hands to move. We stock OEM CGI rollers and equivalent marine-grade stainless alternatives for same-visit replacement.
• Glazing gasket shrinkage on older CGI impact fixed and picture windows. The EPDM gasket pulls away from the frame after years of thermal cycling in Pompano Beach’s high-humidity climate. Wind-driven rain infiltrates, and eventually the IG unit fogs. We replace gaskets with OEM-profile EPDM when available; on units over 15 years with failed seals, we recommend full-frame replacement since the thermal performance is already compromised.
• Hinge and strike plate corrosion on CGI impact entry doors facing the Atlantic. Standard steel fasteners rust and bleed onto the door slab, often mistaken for a finish defect. We replace with marine-grade stainless hardware rated for Pompano Beach’s salt-air environment.
• Locking mechanism misalignment on CGI Series 6000 single hung impact windows after settlement. The sash no longer meets the keeper. The window won’t fully lock, which fails HVHZ compliance and voids wind-mitigation insurance discounts. We realign or replace the locking assembly and verify latch engagement with a documented photo.
• False security from accordion shutters over non-impact windows. A recurring discovery in Pompano Beach: homeowners assume bolted shutters equal hurricane protection, but the underlying windows still fail HVHZ compliance and wind-mitigation inspection. We remove both shutter and original frame, then install CGI impact-rated units that qualify for the insurance discount.

Before

After

CGI Service in Pompano Beach: What Local Conditions Mean for Your Equipment

Pompano Beach sits entirely within Florida’s High-Velocity Hurricane Zone. Every window and door replacement must carry a Miami-Dade Notice of Acceptance or equivalent HVHZ-specific product approval. This is a stricter threshold than cities just across the county line. The practical consequence: a product legally sold in Boca Raton may not be legally installable in Pompano Beach.

The city’s enormous inventory of unrenovated 1950s-1970s CBS homes, concentrated west of Dixie Highway and east toward the Intracoastal, still runs on original single-pane aluminum jalousie windows. These are entirely non-compliant with current HVHZ impact standards. Full-frame replacement is the standard workflow here, not insert or retrofit jobs, because the original frames cannot accept impact-rated glazing and the rough openings were built to dimensions that don’t match modern insert specifications.

Here’s the specific installation quirk we document on every Pompano Beach job: these CBS homes were built with 2×4 buck frames set directly into the block. Inserting a new CGI impact window leaves a hollow gap between the new frame and the rough opening that must be foam-filled and sealed to pass HVHZ inspection. It’s easy to skip and hard to see once the trim goes back on. We photograph the fill before we close it up. This condition is a direct result of the 1950-1980 concrete-block construction era, not something you’d find in Boca Raton’s newer wood-frame inventory.

CGI Models & Products We Service in Pompano Beach

We work on the full CGI impact line commonly found in Pompano Beach service area homes:

• CGI Series 6000 Impact Single Hung - the workhorse in Pompano Beach’s CBS ranch replacements
• CGI Series 8000 Impact Horizontal Roller - popular for porches and Florida rooms facing the Intracoastal
• CGI Impact Sliding Glass Door - frequent failure point: track corrosion and roller seizure
• CGI Impact French Door - hinge and multipoint lock alignment issues after settlement

We use OEM CGI replacement rollers, gaskets, and hardware whenever the profile remains in production. When OEM parts are discontinued, we match equivalent stainless-steel marine-grade components from domestic suppliers. On units older than 15 years with corroded frames and failed IG seals, we generally recommend full-frame replacement. Chasing seals and rollers on a thermally compromised unit wastes money.

CGI Service Pricing in Pompano Beach

FAQs - CGI Windows & Doors in Pompano Beach

Can I just replace the glass in my existing CGI impact windows instead of the whole window?

Sometimes, if the frame is sound and the IG unit failed from seal degradation alone. But in Pompano Beach’s salt-air environment, we often find frame corrosion or buck-frame separation that makes glass-only replacement a temporary fix. We assess the frame condition during our measured survey and tell you which path costs less over ten years. Call (754) 600-8907 to schedule.

My CGI horizontal roller is hard to slide after five years - is that normal?

It’s common in Pompano Beach, not normal. Salt air pits the track and flat-spots the nylon rollers, especially on Intracoastal-facing elevations. We replace rollers and polish or replace the track. If the frame itself is corroding, we flag that during the visit. Call (754) 600-8907 - we stock the common roller sizes.

Do CGI impact windows meet the 130 mph wind requirement for Pompano Beach?

Yes. CGI’s impact-rated product lines carry Miami-Dade NOA approvals that satisfy HVHZ requirements for Pompano Beach’s 130+ mph sustained wind design pressure. We verify the specific NOA number on every unit before ordering and include that documentation in your permit packet.

I already have accordion shutters - do I still need impact windows in Pompano Beach?

Shutters over non-impact windows do not pass HVHZ compliance or wind-mitigation inspection. The window itself must be impact-rated. Our crew was called to a 1968 CBS ranch in the Pompano Beach Highlands area where the homeowner had accordion shutters bolted over original single-pane aluminum jalousie windows and assumed they were covered for hurricane protection. During the wind mitigation inspection, the jalousies failed the pressure test, so we removed the shutters and the old jalousie frames and installed Impact Windows & Doors - Pompano Beach with CGI Series 6000 impact single hung windows and stainless hardware. The homeowner finally qualified for the wind mitigation discount and the shutters came off the house for good.

How does the concrete block construction of Pompano Beach homes affect window installation?

The 2×4 buck frames set directly into block create a gap between new CGI frames and the rough opening that must be foam-filled and sealed for HVHZ inspection. We document this fill with photos before closing. Skip it and you risk permit failure. Call (754) 600-8907 - we include this step in every written scope.

Service Areas Near Pompano Beach

We run CGI service calls throughout the Pompano Beach core and surrounding markets: CGI service in Lighthouse Point for canal-front properties with similar salt-air exposure, CGI service in Deerfield Beach for the oceanfront condo inventory, plus Boca Raton, Margate, and Oakland Park within our standard service radius.

Book Your CGI Service in Pompano Beach Today

Call (754) 600-8907 to schedule your free measured survey and written estimate. A live person answers, 24/7. We’ll bring the license numbers, the documented photo process, and a price that doesn’t change once work starts.

Written by Sonia Raman, Owner at Sightline Windows & Doors Lighthouse Point, serving Pompano Beach since 2012.