Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Coral Springs, FL
Window and door installation in Coral Springs runs $380-$1,850 per opening depending on product tier, with most complete home projects falling between $8,500 and $24,000. Every home here sits in Broward County’s High Velocity Hurricane Zone, so every replacement window and door must carry a Miami-Dade Notice of Acceptance - a standard that doesn’t apply just north in Palm Beach County. We measure every opening to the sixteenth, write the price before any work starts, and leave a documented photo record under the Haven Standard. Call (754) 600-8907 to schedule your free measured survey.
Why Coral Springs Homes Are Different
Coral Springs was platted and built out almost entirely between the late 1960s and early 1990s as one of Florida’s first large master-planned communities. That leaves thousands of concrete-block-stucco homes with original aluminum-framed single-pane windows now 30-50 years old - well past seal life and non-compliant with current HVHZ hurricane standards. Because development proceeded in large tracts, whole neighborhoods share the same window vintage and failure mode.
The western tracts built in the late 1980s present a particular trap: permitted just before Hurricane Andrew’s 1992 landfall triggered sweeping code rewrites, these homes look contemporary enough that owners assume they’re compliant. They consistently fail wind-mitigation inspections, costing homeowners their insurance discount and triggering mandatory replacement conversations they weren’t expecting.
The local climate compounds everything. Intense year-round UV, near-daily summer convective storms with sustained driving rain, and high humidity rapidly degrade IGU seals, aluminum frame anodizing, and door-threshold weatherstripping. Seasonal afternoon deluges routinely expose failed frame-to-stucco flashing, making proper moisture integration at installation a code and callback issue unique to South Florida’s exterior wall assemblies. The roughly 15-mile inland position reduces direct salt-air corrosion compared to coastal Broward, but heat-cycle stress and hurricane-season wind-pressure loads apply fully.
Our Main Coral Springs Services
These are the two services Coral Springs homeowners call about most, plus sliding and patio doors:
Window Replacement in Coral Springs
We replace original single-pane aluminum frames throughout Coral Springs’s 1970s-1980s ranch and two-story neighborhoods, specifying impact-rated or energy-efficient products that carry the Miami-Dade NOA required here. Every measured survey documents frame condition, stucco integration points, and sightline measurements the customer keeps. Window Replacement in Coral Springs covers full-frame and insert applications by opening type.
Impact Windows & Doors in Coral Springs
HVHZ compliance is not optional in Coral Springs - it’s code and increasingly an insurance requirement. We specify from PGT, CGI, and CWS product lines by performance tier and price range, not by margin. Every installation includes permit pull, inspection coordination, and the documented photo record required for wind-mitigation filing. Impact Windows & Doors in Coral Springs details NOA verification and installation protocol.
Sliding & Patio Doors in Coral Springs
Coral Springs’s original sliding glass doors from the 1970s-1980s suffer from failed rollers, corroded tracks, and single-pane glazing that leaks conditioned air and fails impact standards. We replace with multi-panel sliding systems or French door configurations, addressing the threshold flashing failures common in CBS stucco assemblies here. Sliding & Patio Doors in Coral Springs covers track types, panel counts, and hardware options.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Coral Springs
Most Coral Springs window installation involves removing original single-pane aluminum units from 1970s-1980s CBS construction and installing impact-rated or energy-efficient replacements that meet HVHZ requirements. The work requires precise frame-to-stucco integration because seasonal afternoon deluges here routinely expose failed flashing, and every product must carry a Miami-Dade NOA that doesn’t apply just north in Palm Beach County. Window Installation covers our full product range and measured survey process.
Single & Double Hung Windows
Signs you need it
Original single-pane aluminum hung windows that won’t stay open, show condensation between non-existent IGUs, or rattle in afternoon storm gusts are standard in Coral Springs’s older tracts.
What it costs in Coral Springs
Single and double hung window installation in Coral Springs typically ranges $420-$890 per opening for vinyl-framed impact-rated units, with wood-clad and architectural-grade products running higher.
How we do it
We remove the sash and frame, inspect the rough opening for moisture damage common in CBS stucco assemblies here, install the new unit with HVHZ-approved anchoring pattern, integrate flashing with the existing stucco, and seal with code-specified sealant before final inspection.
Horizontal Roller Windows
Signs you need it
Roller windows that jam in their tracks, show daylight at the meeting rail, or were installed before 1992 without impact-rated glazing are prevalent in Coral Springs’s pre-Andrew western tracts.
What it costs in Coral Springs
Horizontal roller window installation in Coral Springs typically ranges $480-$960 per opening depending on size, screen configuration, and whether the project specifies ES Windows or ECO Window Systems product lines.
How we do it
We measure the daylight opening to the sixteenth, specify the roller system by sash weight and wind-load requirement, install with proper sill pan and end-dam integration for driving-rain protection, and document the completed assembly with photos for the customer’s wind-mitigation file.
What Window Installation Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Single or double hung window, vinyl impact-rated | $420-$890 per opening |
| Horizontal roller window, impact-rated | $480-$960 per opening |
| Complete home window replacement, 12-20 openings | $8,500-$18,500 total |
How long does window installation take in Coral Springs?
Most complete home window installations in Coral Springs finish in 2-4 business days depending on opening count and stucco repair needs. We pull permits through Broward County and schedule inspections before we start, so the timeline includes inspection gaps. Call (754) 600-8907 for a specific schedule based on your opening count - estimates are free.
Do you handle permits for window installation in Coral Springs?
Yes, we pull all permits through Broward County’s HVHZ program and coordinate inspections. Every product we specify carries a current Miami-Dade NOA, and we provide the documentation your insurance company needs for wind-mitigation credit. Call (754) 600-8907 to review your permit status - estimates are free.
Door Installation in Coral Springs
Door installation in Coral Springs means replacing original 1970s-1980s entry units that lack impact-rated glazing and proper HVHZ anchoring, or upgrading patio doors that leak at the threshold during summer deluges. The CBS stucco construction common here requires careful integration at the frame-to-wall junction to prevent the moisture intrusion that triggers callbacks in South Florida’s climate. Door Installation covers our full entry, patio, and specialty door range.
Hurricane-Proof Front & Entry Doors
Signs you need it
Original entry doors with single-pane decorative glass, no impact-rated sidelights, or frames that flex during pressure testing are common in Coral Springs’s pre-Andrew housing stock and fail wind-mitigation inspection.
What it costs in Coral Springs
Hurricane-proof front and entry door installation in Coral Springs typically ranges $1,850-$4,200 depending on size, decorative glass options, and whether the project includes impact-rated sidelights or transoms.
How we do it
We verify the rough opening structure for HVHZ anchoring capacity, specify the door system from Therma-Tru or ViewLux by impact rating and design requirement, install with continuous sill pan and proper stucco integration, and document with photos for permit closeout and insurance filing.
French & Double Doors
Signs you need it
French doors that leak at the astragal, show rot at the sill, or lack multi-point locking and impact-rated glazing are frequent replacement triggers in Coral Springs’s 1980s-era homes with rear patio access.
What it costs in Coral Springs
French and double door installation in Coral Springs typically ranges $2,400-$5,800 per pair depending on material, glass specification, and whether the opening requires structural header modification for HVHZ compliance.
How we do it
We assess the header and jamb structure for wind-load transfer, specify the door pair with multi-point hardware and impact-rated IGU, install with integrated threshold pan and end dams, adjust the active panel for proper compression seal, and record final sightline measurements for the customer’s file.
What Door Installation Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Hurricane-proof front and entry door with sidelights | $1,850-$4,200 per unit |
| French or double door pair, impact-rated | $2,400-$5,800 per pair |
| Standard replacement entry door, non-impact | $980-$1,850 per unit |
Do I need a permit to replace my front door in Coral Springs?
Yes, all entry door replacements in Coral Springs require a Broward County permit because HVHZ compliance must be verified. We pull the permit, provide the Miami-Dade NOA for your selected product, and coordinate inspection. Call (754) 600-8907 to confirm your door’s compliance status - estimates are free.
Can I keep my decorative glass with an impact-rated door?
Yes, manufacturers including Therma-Tru and ViewLux offer decorative impact-rated glass options that meet HVHZ standards. The glass carries a separate Miami-Dade NOA and is laminated with an interlayer that holds together under impact. Call (754) 600-8907 to review decorative options with impact ratings - estimates are free.
Energy-Efficient Windows in Coral Springs
Energy-efficient window installation in Coral Springs addresses the extreme cooling load from original single-pane aluminum units that conduct heat and leak conditioned air, with summer electric bills often running 40-60% above comparable homes with modern glazing. The intense UV and near-daily summer storms here degrade standard low-E coatings faster than inland northern climates, making product selection and installation detail critical to realized savings. Energy-Efficient Windows covers our full performance tier range and measured survey process.
Low-E & Argon Gas Glass
Signs you need it
Rooms with south or west exposure that overheat by mid-afternoon, faded flooring near windows, or electric bills exceeding $280 in summer months indicate failed or absent low-E coating in Coral Springs’s original aluminum windows.
What it costs in Coral Springs
Low-E and argon gas glass window installation in Coral Springs typically ranges $520-$1,080 per opening depending on frame material, coating tier, and whether the specification includes impact-rated laminated glass for HVHZ compliance.
How we do it
We conduct a frame-by-frame solar heat gain assessment using local orientation and shading data, specify the low-E coating by SHGC and U-factor appropriate to the exposure, fill with argon at factory seal, and verify with documented performance values the customer keeps for utility rebate filing.
ENERGY STAR Replacement Windows
Signs you need it
Windows without the ENERGY STAR label, installed before 2015, or in homes where the FPL Home Energy Survey identified window thermal bypass are prime candidates for replacement in Coral Springs’s aging housing stock.
What it costs in Coral Springs
ENERGY STAR replacement window installation in Coral Springs typically ranges $580-$1,240 per opening for vinyl-framed impact-rated units that meet both ENERGY STAR Southern Climate Zone requirements and Miami-Dade HVHZ standards.
How we do it
We verify the existing frame condition and rough opening insulation level, specify from CWS or ECO Window Systems product lines by certified performance values, install with complete air-sealing package including backer rod and sealant at the interior-exterior transition, and provide the ENERGY STAR certificate and documented photo record.
What Energy-Efficient Windows Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Low-E and argon gas window, impact-rated | $520-$1,080 per opening |
| ENERGY STAR replacement window, impact-rated | $580-$1,240 per opening |
| Complete home energy-efficient upgrade, 12-20 openings | $9,500-$21,000 total |
Will energy-efficient windows lower my FPL bill in Coral Springs?
Yes, most Coral Springs homeowners see 15-30% summer cooling reduction after replacing single-pane aluminum with ENERGY STAR impact-rated windows, with payback typically in 6-10 years depending on home size and existing HVAC efficiency. Call (754) 600-8907 for a load calculation specific to your home - estimates are free.
Do energy-efficient windows still meet hurricane code in Coral Springs?
Yes, every energy-efficient window we specify for Coral Springs carries both ENERGY STAR certification and a Miami-Dade NOA for HVHZ impact rating. The low-E coating and argon fill are added to laminated impact glass, not substituted for it. Call (754) 600-8907 to review dual-certified options - estimates are free.
Impact Garage Doors in Coral Springs
Impact garage door installation in Coral Springs is increasingly driven by insurance requirements, as carriers demand documented HVHZ-compliant openings for policy renewal or new coverage. Original garage doors from the 1970s-1980s lack wind-load rating, proper track anchoring to the CBS header, and impact-resistant glazing in any window sections, creating a significant vulnerability in the building envelope during hurricane season. Impact Garage Doors covers our full wind-load rated range and installation protocol.
Hurricane-Rated Garage Doors
Signs you need it
Garage doors that bow visibly in moderate winds, lack wind-load stickers, or have non-impact window sections are standard in Coral Springs’s original housing stock and increasingly rejected by insurance underwriters.
What it costs in Coral Springs
Hurricane-rated garage door installation in Coral Springs typically ranges $1,650-$3,800 depending on size, insulation level, window section configuration, and wind-load rating required for the home’s exposure category.
How we do it
We assess the existing header and jambs for HVHZ anchoring capacity, specify the door and track system from Mr-Glass or CWS by design pressure rating, install with engineered fastening pattern and reinforced struts, integrate the threshold for driving-rain protection, and document with photos for wind-mitigation filing.
Wind-Load Code Compliance
Signs you need it
Homes built in Coral Springs before 1994, those with recent insurance wind-mitigation inspections flagging the garage door, or properties in western tracts permitted under pre-Andrew standards require verification and likely upgrade.
What it costs in Coral Springs
Wind-load code compliance upgrade for garage doors in Coral Springs typically ranges $980-$2,400 if the existing door can be reinforced with approved hardware, or $1,650-$3,800 for full replacement with a rated door system.
How we do it
We review the existing permit history and wind-mitigation report, determine whether reinforcement or replacement is required for compliance, execute the work with permit pull and inspection coordination, and provide the documentation needed for insurance discount filing under the Haven Standard.
What Impact Garage Doors Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Hurricane-rated garage door, full replacement | $1,650-$3,800 per door |
| Wind-load reinforcement of existing door | $980-$2,400 per door |
| Impact-rated window section upgrade | $340-$680 per section |
Does my garage door need to be impact-rated for insurance in Coral Springs?
Increasingly yes - Florida carriers are requiring documented HVHZ-compliant openings, and the garage door is often the largest unprotected opening in the home. We verify your current rating and provide the upgrade path and documentation needed for filing. Call (754) 600-8907 to check your door’s compliance - estimates are free.
Can I keep my garage door opener with a new impact-rated door?
Sometimes - if the opener is rated for the increased weight of an impact-rated door and the header structure can support the new door’s operating loads. We assess both during the measured survey and specify compatible operators where needed. Call (754) 600-8907 for opener compatibility review - estimates are free.
Custom & Geometric Windows in Coral Springs
Custom and geometric window installation in Coral Springs often involves replacing original shaped units in 1980s-era homes with modern impact-rated equivalents that preserve architectural character while meeting HVHZ standards. The master-planned community design of Coral Springs incorporated radius tops, octagons, and trapezoids as signature elements, but these original shapes lack both impact rating and energy performance, creating a compliance and comfort problem unique to the era’s architecture. Custom & Geometric Windows covers our full custom shape and oversized opening capabilities.
Geometric & Shaped Windows
Signs you need it
Original radius-top, octagon, or trapezoid windows with single-pane glass, failed seal showing condensation, or frames that do not carry a Miami-Dade NOA are common in Coral Springs’s 1980s custom and semi-custom homes.
What it costs in Coral Springs
Geometric and shaped window installation in Coral Springs typically ranges $680-$1,850 per opening depending on complexity, whether the shape requires custom jamb fabrication, and impact-rating requirements for the specific geometry.
How we do it
We field-measure the exact chord, radius, and angle with digital templates, specify from PGT or CGI custom programs with verified NOA for the specific shape, fabricate the unit to measured dimensions, and install with integrated flashing appropriate to the non-standard geometry and local driving-rain exposure.
Oversized Openings
Signs you need it
Large picture windows or grouped openings exceeding 48 square feet that flex in wind, show seal failure at the center, or were assembled from multiple smaller units instead of engineered as a single structural assembly need assessment.
What it costs in Coral Springs
Oversized opening window installation in Coral Springs typically ranges $1,240-$3,400 per opening depending on dimensions, structural reinforcement requirements for HVHZ wind loads, and lifting equipment needed for the installation.
How we do it
We engineer the opening for design pressure loads specific to the home’s exposure, specify laminated impact-rated IGU with reinforced framing from ES Windows or Mr-Glass, coordinate crane or specialized lift access if required, and install with continuous anchoring pattern and documented structural verification.
What Custom & Geometric Windows Costs in Coral Springs
| Item | Typical range in Coral Springs |
|---|---|
| Geometric or shaped window, custom fabricated | $680-$1,850 per opening |
| Oversized opening, impact-rated | $1,240-$3,400 per opening |
| Custom arched or curved window pair | $1,850-$4,200 per pair |
Can you match my existing arched windows with impact-rated units in Coral Springs?
Yes, we field-measure the exact radius and chord with digital templates and specify from PGT or CGI custom programs that carry Miami-Dade NOAs for the specific geometry. The new unit matches the sightline and sight angle of the original. Call (754) 600-8907 to schedule arch measurement - estimates are free.
Do custom shapes cost more than standard rectangles in Coral Springs?
Typically 30-60% more due to custom jamb fabrication, specialized glazing, and the engineering review required for HVHZ compliance of non-standard geometry. We write the exact price in the measured survey before any work starts. Call (754) 600-8907 for specific pricing on your shapes - estimates are free.
Brands We Service in Coral Springs
We specify from eight verified manufacturer lines - PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux - by performance tier and price range, not by margin. For Coral Springs’s HVHZ requirements, we frequently draw from CWS and ES Windows for mid-tier impact-rated projects and ECO Window Systems for energy-efficient specifications. Parts and hardware for these lines are stocked locally through our Miami-area distribution, with most non-custom units available in 10-14 business days. See our brands for full specifications and performance data.
Pricing for Windows & Doors in Coral Springs, FL
| Service | Typical range in Coral Springs |
|---|---|
| Single or double hung window, vinyl impact-rated | $420-$890 per opening |
| Horizontal roller window, impact-rated | $480-$960 per opening |
| Hurricane-proof front and entry door with sidelights | $1,850-$4,200 per unit |
| French or double door pair, impact-rated | $2,400-$5,800 per pair |
| Low-E and argon gas window, impact-rated | $520-$1,080 per opening |
| ENERGY STAR replacement window, impact-rated | $580-$1,240 per opening |
| Hurricane-rated garage door, full replacement | $1,650-$3,800 per door |
| Wind-load reinforcement of existing garage door | $980-$2,400 per door |
| Geometric or shaped window, custom fabricated | $680-$1,850 per opening |
| Oversized opening, impact-rated | $1,240-$3,400 per opening |
| Complete home window replacement, 12-20 openings | $8,500-$18,500 total |
| Complete home energy-efficient upgrade, 12-20 openings | $9,500-$21,000 total |
Prices in Coral Springs increase with stucco repair needs after original aluminum removal, structural header modification for larger openings, and custom geometry requiring specialized fabrication. The price we write in your measured survey is the price on the final invoice - Haven Clause 1, no surprises.
Neighborhoods We Serve in Coral Springs
We work across Coral Springs’s full master-planned community footprint, from the original 1970s tracts to the western developments permitted just before Andrew’s code changes. Scheduling and dispatch are coordinated from our Miami office with crews serving Coral Springs locally, typically offering next-available measured surveys within 2-3 business days.
- Ramblewood
- Cypress Run
- Country Club Trails
- Heron Bay
- The Isles
Service Area - Cities Near Coral Springs
Our crews serve the full Broward County HVHZ corridor from the Miami-area coordination office, with measured surveys and installation available in Margate, FL to the south, Pompano Beach, FL to the east, Deerfield Beach, FL along the coastal zone, and Boca Raton, FL to the north. Every city in our service area falls under the same Miami-Dade NOA and HVHZ requirements that govern Coral Springs installations.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Coral Springs
We typically schedule measured surveys within 2-3 business days, not same-day. The survey itself takes 45-90 minutes depending on opening count, and you keep the documented measurements. We write the price before we leave - Haven Clause 1 - so there’s no follow-up quote call.
Most Coral Springs master-planned communities have architectural review committees that require product samples, color selections, and installation method documentation. We provide the Miami-Dade NOA, manufacturer specification sheets, and photo documentation of completed neighborhood projects to support your application.
Yes, our crews serve Coral Springs continuously, with scheduling coordinated from our Miami-area office. We do not suspend service during hurricane season; in fact, post-storm inspection demand often increases, and we maintain normal measured survey availability with extended installation lead times only during active storm recovery periods.
Call (754) 600-8907 to schedule your free measured survey. We’ll document every opening, write the price before any work starts, and leave you with a photo record when the job is done - the Haven Standard since 2012.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Coral Springs Customers Say
"Good crew, tidy install, finished a day early. Paperwork had the license number on it."
- Barry L."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.