Therma-Tru Sliding & Patio Doors Nationwide | Sightline Windows & Doors Lighthouse Point

Therma-Tru Sliding & Patio Doors: The Lighthouse Point Owner’s Guide

We stock and install Therma-Tru-compatible sliding and patio door systems in Lighthouse Point, with typical installed replacement costs running $2,800-$5,400 depending on size, impact rating, and hardware finish. Most Lighthouse Point homeowners notice the problem first as a sticking roller or a gap they can see daylight through, then discover the frame or track has shifted after years of salt air exposure near the Intracoastal. We carry common Therma-Tru roller assemblies, multipoint locks, and track sets on our trucks, and we can measure, quote, and schedule without a deposit.

Call (754) 600-8907

Which Therma-Tru Models This Applies To

Therma-Tru sliding and patio doors fall into several series, and the parts are not interchangeable across all of them. The most common units we see in Lighthouse Point are the Impact-Resistant Sliding Patio Doors, the Classic-Craft Canvas Collection sliding systems, and the Fiber-Classic sliding door line. Each uses a distinct roller carriage width, track profile, and multipoint lock footprint.

To identify your model, check the etched marking on the glass spacer or the sticker on the door jamb, usually located on the hinge side of the fixed panel. The series code (often starting with “TT-” followed by a four-digit number) tells us which roller assembly and lock body you need. The roller alone ranges from 1-1/4 inch to 2-1/8 inch wheel diameter depending on the series, and using the wrong size chews the track in six months.

We source OEM Therma-Tru hardware where it matters for warranty compatibility, and we use verified aftermarket equivalents on rollers and weatherstripping where the spec matches and the price difference is real. For Lighthouse Point’s salt-air environment, we specify stainless or polymer rollers over standard steel, even if the original came with steel. That is not upselling; it is what we have learned replacing the same rollers twice on canal-front homes near the Lighthouse Point Marina.

Signs Your Therma-Tru Sliding & Patio Door Is Failing

• The door sticks or requires shoulder pressure to move. Usually the roller wheels have flattened or the axle bearings have seized. In Lighthouse Point, salt accumulation accelerates this; we see it inside of five years on homes within two blocks of the water.
• Visible gap at the center meeting stile when closed. The multipoint lock is not engaging fully, or the keepers have shifted. This is a security issue, not just an air leak.
• Water pooling on the interior track after rain. The weep holes are clogged with salt residue and sand, or the sill cap seal has hardened. Left alone, the subfloor takes the damage.
• Condensation between the glass panes. The insulated glass unit (IGU) seal has failed. Therma-Tru IGUs are replaceable without swapping the whole door, but the sash has to come out to measure the exact glass thickness and spacer width.
• The handle lifts but the door does not unlock. The mortise lock body has worn cam lobes, or the connecting rods between the handle and the multipoint bolts have bent from forced operation. Continuing to force it snaps the rod entirely.

Before

After

Replacement Cost & What’s Included

For Lighthouse Point properties, installed Therma-Tru sliding and patio door replacement typically ranges $2,800-$5,400. The low end covers a standard 6-foot fiberglass slider with basic hardware in a non-impact zone; the high end covers 8-foot impact-rated systems with Low-E glazing and custom exterior finishes. Partial repairs, roller and lock replacement run $340-$780 depending on how many components need swapping.

What drives the range: impact rating required by Florida Building Code in wind-borne debris regions, jamb depth (4-9/16 inch vs. 6-9/16 inch), and whether the existing frame is square enough to accept a standard retrofit or needs reframing. Our quote includes the measured survey you keep, the written scope, all hardware, installation, permit pulling if required, and the documented photo record. The 365-Day Done Right Promise covers the work under Haven Clause 5: No Surprises.

DIY or Call Us?

There is one thing a homeowner can safely check: the weep holes. Run a thin wire through the exterior slots in the sill to clear salt and debris. If water drains afterward, you have bought some time.

Everything else carries real risk. The rollers on a Therma-Tru slider support 80-120 pounds per panel, and releasing the adjustment screw without supporting the sash can drop glass onto your hand. The multipoint lock system is under spring tension; removing the mortise body without compressing the bolts first sends small parts into the wall cavity. And impact-rated glass units weigh 40-60 pounds per square foot, a two-person lift even for our crew.

We are not affiliated with Therma-Tru; we are an independent service provider. We do stock the common rollers, locks, and keepers for Therma-Tru series we see repeatedly in Lighthouse Point. If you are unsure of your series, text us a photo of the jamb sticker and we will tell you what fits before we drive out. Measure twice, write it down, then we talk price.

FAQs