Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterWindows & Doors in Delray Beach, FL
Window and door installation in Delray Beach runs into a problem almost no other Florida city faces at this scale: the Historic Preservation Board can reject a replacement window for deviating from a 1920s wood-frame profile, while Palm Beach County building code east of I-95 demands impact-rated glazing. We measure every opening, document the existing sightline and frame depth, and specify a product that satisfies both requirements before any work starts. Call (754) 600-8907 to schedule your measured survey.
Why Delray Beach Homes Are Different
Delray Beach sits on the Atlantic with direct onshore exposure that inland Palm Beach County does not experience. Salt-laden winds oxidize aluminum frames and corrode hardware on oceanfront and Intracoastal properties years faster than the same products last in Boca Raton or Boynton Beach. The housing stock is split three ways: 1920s-1940s frame vernacular and Mediterranean revival homes in historic districts near Atlantic Avenue, 1950s-1970s CBS ranch homes in Lake Ida and Seagate still carrying original jalousie or single-pane aluminum windows, and massive 1980s-1990s 55-plus communities west of Military Trail like Kings Point with aging builder-grade single-hung units that are simultaneously seal-failing and wind-code non-compliant. That last category is unique - thousands of identical units installed by the same builder in the same decade means a single HOA board vote can generate a bulk replacement contract that has no parallel in neighboring cities. Permits pull through Palm Beach County, but historic district work requires separate Historic Preservation Board approval, adding a compliance layer we build into every specification.
Our Main Delray Beach Services
Most calls from Delray Beach homeowners center on two problems: replacing failed or non-compliant windows, and installing impact-rated openings that meet current windborne debris code. These three pages cover the work in detail.
Window Replacement in Delray Beach
We replace windows across all three Delray Beach housing strata, from historic-district replicas that pass board review to bulk HOA contracts in Kings Point. Every job starts with a measured survey you keep, and the written quote matches that document exactly. We specify from eight manufacturer lines by performance tier and opening requirement, not by margin. Read more about Window Replacement in Delray Beach.
Impact Windows & Doors in Delray Beach
East of I-95, impact-rated glazing or shutter protection is mandatory under Palm Beach County’s Florida Building Code adoption. We source FL-product-approved impact windows that replicate historic wood-frame profiles for Del-Ida Park and Nassau Park properties, solving the dual-compliance problem that defines this market. Read more about Impact Windows & Doors in Delray Beach.
Sliding & Patio Doors in Delray Beach
Patio door replacement in Delray Beach means managing salt corrosion on hardware, impact-rated glass weight on rollers, and the tight sightline tolerances of 1970s CBS openings in neighborhoods like Seagate. We measure frame squareness and specify rollers rated for the actual door weight. Read more about Sliding & Patio Doors in Delray Beach.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterWindow Installation in Delray Beach
Window installation in Delray Beach requires matching the product to the housing era and the compliance layer. Historic district homes near Atlantic Avenue need FL-product-approved impact windows that replicate original wood-frame profiles for Historic Preservation Board approval. West of Military Trail, Kings Point and similar 55-plus communities contain thousands of identical original aluminum windows that are seal-failing and wind-code non-compliant - a bulk replacement market that shapes how we specify and schedule. Every Window Installation engagement begins with a measured survey you keep, and the written quote cannot differ from that document.
Single & Double Hung Windows
Signs you need it
Upper sash won’t stay open, visible daylight between sash and frame, or original aluminum units in Kings Point with failed seals and non-compliant wind ratings.
What it costs in Delray Beach
Single and double hung window installation in Delray Beach typically runs $650-$1,400 per opening for vinyl or aluminum units, and $1,800-$3,200 for impact-rated or historic-replica wood-clad products.
How we do it
We measure rough opening, check for square and plumb, install with proper shimming and fastening pattern, then seal with backer rod and sealant per manufacturer spec; every step is photographed and the record is yours.
Horizontal Roller Windows
Signs you need it
Roller mechanism grinds or sticks, sash jumps track in wind, or original 1970s units in Seagate and Lake Ida have corroded rollers from salt air exposure.
What it costs in Delray Beach
Horizontal roller window installation in Delray Beach typically runs $750-$1,550 per opening for standard aluminum, and $2,000-$3,500 for impact-rated units with stainless hardware.
How we do it
We verify track level and sill slope, install with corrosion-resistant fasteners rated for coastal exposure, lubricate and test roller operation under load, then document with photo record.
What Window Installation Costs in Delray Beach
| Item | Typical range in Delray Beach |
|---|---|
| Single/Double Hung - standard vinyl/aluminum | $650 - $1,400 per opening |
| Single/Double Hung - impact-rated or wood-clad | $1,800 - $3,200 per opening |
| Horizontal Roller - standard aluminum | $750 - $1,550 per opening |
| Horizontal Roller - impact-rated with stainless hardware | $2,000 - $3,500 per opening |
How long does window installation take in Delray Beach?
Most residential window installations in Delray Beach complete in one to three days depending on opening count and whether historic district work requires staged approval. Call (754) 600-8907 for a timeline based on your specific property.
Do you handle Historic Preservation Board approvals in Delray Beach?
We document existing sightlines, materials, and profiles for your application and specify FL-product-approved replicas that match; the board review is your process, but our specification package is built for it. Call (754) 600-8907 to review your property’s requirements.
Door Installation in Delray Beach
Door installation in Delray Beach faces the same dual-compliance pressure as windows: historic districts require profile and material continuity, while windborne debris region code east of I-95 demands impact-rated or protected openings. Entry doors on 1920s Mediterranean revival homes near Old School Square need solid-wood or wood-clad impact products that replicate original rail-and-stile dimensions. In Kings Point and similar communities, original hollow-core or uninsulated metal doors fail both energy and impact code. Every Door Installation begins with a measured survey you keep, and the written quote matches that document.
Entry Doors
Signs you need it
Door slab is delaminating, frame is rotting at sill, or original door in a historic district lacks the mass and profile for approved replacement.
What it costs in Delray Beach
Entry door installation in Delray Beach typically runs $1,200-$2,800 for standard pre-hung units, and $3,500-$6,500 for impact-rated solid wood or fiberglass with multi-point locking.
How we do it
We measure rough opening, verify frame plumb and threshold slope, install with shims and long screws into framing, then test lockset operation and seal perimeter with backer rod and sealant.
Hurricane-Proof Front & Entry Doors
Signs you need it
Current door is not impact-rated, you are east of I-95 in the windborne debris region, or your insurance requires documented wind protection.
What it costs in Delray Beach
Impact-rated entry door installation in Delray Beach typically runs $3,500-$6,500 for fiberglass or wood-clad with impact glass, and $7,500-$12,000 for custom solid-wood with integrated impact panel.
How we do it
We verify FL product approval number, install with reinforced hinges and multi-point lockset, test latching under pressure, and document with photo record including approval label.
What Door Installation Costs in Delray Beach
| Item | Typical range in Delray Beach |
|---|---|
| Entry Door - standard pre-hung | $1,200 - $2,800 |
| Entry Door - impact-rated fiberglass/wood-clad | $3,500 - $6,500 |
| Impact Entry Door - custom solid-wood | $7,500 - $12,000 |
Do impact doors require special permits in Delray Beach?
All door replacements in Palm Beach County require a permit; impact-rated products must show FL product approval on the label, which we verify before installation. Call (754) 600-8907 and we will confirm your permit path.
Can you match a historic door profile in Delray Beach?
We specify from manufacturer lines including Therma-Tru and ViewLux with custom rail-and-stile dimensions; the measured survey documents your existing sightline for replication. Call (754) 600-8907 to review your property’s requirements.
Energy-Efficient Windows in Delray Beach
Energy-efficient windows in Delray Beach solve two distinct problems: the 1950s-1970s CBS homes in Lake Ida and Seagate still carry single-pane aluminum or jalousie windows with no thermal break, and the 1980s-1990s 55-plus communities west of Military Trail have builder-grade aluminum single-hung units with failed seals and high solar heat gain. Both housing types face Florida’s cooling-dominated energy load, and both benefit from low-E coatings, argon gas fill, and frames with thermal breaks. Every Energy-Efficient Windows specification names the U-factor and SHGC we are targeting for your orientation and shading.
Low-E & Argon Gas Glass
Signs you need it
Rooms with western or southern exposure overheat by mid-afternoon, or you can feel radiant heat through the glass even when the AC is running.
What it costs in Delray Beach
Low-E and argon gas window installation in Delray Beach typically runs $800-$1,650 per opening for double-pane vinyl, and $1,400-$2,400 for triple-pane or enhanced low-E packages.
How we do it
We measure each opening, specify low-E coating by orientation and SHGC target, install with warm-edge spacers and argon fill verification, then document performance spec on your record.
ENERGY STAR Replacement Windows
Signs you need it
Current windows are pre-2000 aluminum single-hung with no low-E, or your FPL bill spikes in summer despite thermostat settings that have not changed.
What it costs in Delray Beach
ENERGY STAR replacement window installation in Delray Beach typically runs $700-$1,500 per opening for standard vinyl, and $1,600-$2,800 for composite or fiberglass with premium low-E and argon.
How we do it
We verify ENERGY STAR climate zone compliance for South Florida, specify U-factor and SHGC from the measured survey, install per manufacturer thermal break requirements, and label each unit on your photo record.
What Energy-Efficient Windows Costs in Delray Beach
| Item | Typical range in Delray Beach |
|---|---|
| Low-E/Argon - double-pane vinyl | $800 - $1,650 per opening |
| Low-E/Argon - triple-pane or enhanced | $1,400 - $2,400 per opening |
| ENERGY STAR - standard vinyl | $700 - $1,500 per opening |
| ENERGY STAR - composite/fiberglass premium | $1,600 - $2,800 per opening |
Will energy-efficient windows lower my FPL bill in Delray Beach?
Properly specified low-E windows with appropriate SHGC for south Florida orientation typically reduce cooling load measurably; we document the U-factor and SHGC target so you can verify against your actual usage. Call (754) 600-8907 for a specification based on your home’s exposure.
Do energy-efficient windows need to be impact-rated in Delray Beach?
East of I-95, yes - all replacement windows must be impact-rated or protected with shutters; we specify energy-efficient impact products from lines like ES Windows and ECO Window Systems that carry both ratings. Call (754) 600-8907 to confirm your zone.
Impact Garage Doors in Delray Beach
Impact garage doors in Delray Beach are governed by the same windborne debris region boundary as windows and entry doors: east of I-95, garage doors must be impact-rated or protected. The 1980s-1990s 55-plus communities west of Military Trail present a different problem - original non-impact doors that may technically be outside the mandatory zone but still face insurance requirements and HOA maintenance standards. Salt corrosion on hardware and track is accelerated on oceanfront and Intracoastal properties. Every Impact Garage Doors specification includes wind-load rating, track gauge, and hardware corrosion resistance for your exposure.
Hurricane-Rated Garage Doors
Signs you need it
Current door lacks wind-load sticker, panels are dimpled or bowed from prior wind events, or you are east of I-95 and replacing any garage door.
What it costs in Delray Beach
Hurricane-rated garage door installation in Delray Beach typically runs $1,800-$3,500 for standard 8×7 or 16×7 steel with impact-rated glazing, and $4,500-$7,500 for custom wind-load rated wood or full-view aluminum.
How we do it
We measure opening and verify header capacity, specify door with documented wind-load rating for your exposure category, install with reinforced track and heavy-duty hardware, then test operation and document rating label.
Wind-Load Code Compliance
Signs you need it
Permit application requires wind-load documentation, insurance inspection flagged non-compliant door, or HOA maintenance review identified original builder-grade unit.
What it costs in Delray Beach
Wind-load code compliance garage door installation in Delray Beach typically runs $2,200-$4,000 for standard sizes with full documentation package, and $5,000-$8,500 for oversized or custom openings with engineering letter.
How we do it
We verify exposure category and wind speed requirement from Palm Beach County code, specify door with FL product approval and wind-load sticker, install per manufacturer wind-load detail, and provide documentation for permit closeout.
What Impact Garage Doors Costs in Delray Beach
| Item | Typical range in Delray Beach |
|---|---|
| Hurricane-Rated - standard steel with impact glass | $1,800 - $3,500 |
| Hurricane-Rated - custom wood or full-view aluminum | $4,500 - $7,500 |
| Wind-Load Compliance - standard with documentation | $2,200 - $4,000 |
| Wind-Load Compliance - oversized/custom with engineering | $5,000 - $8,500 |
Does my garage door need to be impact-rated in Delray Beach?
East of I-95, all garage doors must be impact-rated or protected with shutters; west of I-95, wind-load rated may suffice depending on exposure and insurance requirements. Call (754) 600-8907 and we will verify your specific address against current code.
Can you replace a garage door without changing the opener?
We evaluate opener capacity against new door weight and balance; if the opener is within spec and functional, we reinstall it on the new door with adjusted travel limits and force settings. Call (754) 600-8907 for an assessment of your current system.
Custom & Geometric Windows in Delray Beach
Custom and geometric windows in Delray Beach are concentrated in two areas: the 1920s-1940s historic districts near Atlantic Avenue, where arched and curved windows are original features that must be replicated for Historic Preservation Board approval, and contemporary oceanfront and Intracoastal homes where oversized openings frame views but must still carry impact ratings. Both applications require precise sightline measurement and manufacturer capability for non-rectangular impact glazing. Every Custom & Geometric Windows job begins with a field-measured template you approve before fabrication.
Arched & Curved Windows
Signs you need it
Original arched window in a Del-Ida Park or Nassau Park home is rotting or leaking, or replacement rectangular unit was previously installed and Historic Preservation Board requires correction.
What it costs in Delray Beach
Arched and curved window installation in Delray Beach typically runs $2,500-$5,000 for standard radius vinyl or aluminum, and $6,500-$12,000 for custom wood-clad impact-rated with true divided lite.
How we do it
We field-measure radius, chord, and sightline with template board, submit for your approval, fabricate to approved template, then install with custom flashing and document fit with photo record.
Oversized Openings
Signs you need it
Contemporary home has window wall or picture window exceeding standard manufacturer maximums, or you are combining multiple openings into one framed view with impact-rated glass.
What it costs in Delray Beach
Oversized window installation in Delray Beach typically runs $4,000-$8,000 for engineered vinyl or aluminum combinations, and $10,000-$18,000 for steel or wood-clad impact-rated systems with structural mullions.
How we do it
We verify header and jamb structural capacity, engineer mullion or structural post spacing per manufacturer spec, install with crane or glass handler as required, and document structural connections on photo record.
What Custom & Geometric Windows Costs in Delray Beach
| Item | Typical range in Delray Beach |
|---|---|
| Arched/Curved - standard radius vinyl/aluminum | $2,500 - $5,000 |
| Arched/Curved - custom wood-clad impact-rated | $6,500 - $12,000 |
| Oversized - engineered vinyl/aluminum | $4,000 - $8,000 |
| Oversized - steel/wood-clad impact with structural mullions | $10,000 - $18,000 |
How long does custom window fabrication take in Delray Beach?
Custom and geometric windows typically require four to eight weeks from approved template to delivery; we coordinate templating, approval, and permit timing so fabrication and approval run parallel. Call (754) 600-8907 to schedule templating for your project timeline.
Can impact-rated glass be curved or arched in Delray Beach?
Yes, several manufacturer lines including CGI and CWS offer FL-product-approved impact-rated laminated glass in true radius and segmented arch configurations; we verify approval number before specifying. Call (754) 600-8907 to review your opening’s requirements.
Brands We Service in Delray Beach
We specify from eight verified manufacturer lines: PGT, CGI, CWS, ES Windows, ECO Window Systems, Mr-Glass, Therma-Tru, and ViewLux. Parts and hardware for CGI, CWS, and ES Windows are stocked for faster turnaround on common repairs and adjustments. See our brands for full specifications by performance tier and price range.
Pricing for Windows & Doors in Delray Beach, FL
| Service | Typical range in Delray Beach |
|---|---|
| Single/Double Hung Windows - standard | $650 - $1,400 per opening |
| Single/Double Hung Windows - impact/historic | $1,800 - $3,200 per opening |
| Horizontal Roller Windows - standard | $750 - $1,550 per opening |
| Horizontal Roller Windows - impact | $2,000 - $3,500 per opening |
| Entry Doors - standard pre-hung | $1,200 - $2,800 |
| Entry Doors - impact-rated | $3,500 - $6,500 |
| Impact Entry Doors - custom solid-wood | $7,500 - $12,000 |
| Low-E/Argon Windows - double-pane | $800 - $1,650 per opening |
| Low-E/Argon Windows - triple/enhanced | $1,400 - $2,400 per opening |
| ENERGY STAR Windows - standard | $700 - $1,500 per opening |
| ENERGY STAR Windows - premium | $1,600 - $2,800 per opening |
| Hurricane-Rated Garage Doors - standard | $1,800 - $3,500 |
Prices in Delray Beach push toward the higher end when historic district work requires custom profiles, when oceanfront exposure demands stainless or bronze hardware, or when bulk HOA contracts require phased scheduling. The written quote from your measured survey is the final invoice - Haven Clause 1, no surprises.
Neighborhoods We Serve in Delray Beach
We install and replace windows and doors across Delray Beach from the historic districts through the 55-plus communities. Scheduling and dispatch are coordinated from our Miami office; crews serve Delray Beach locally with response typically within one to two business days for measured surveys.
- Del-Ida Park Historic District
- Nassau Park Historic District
- Lake Ida
- Seagate
- Kings Point
Service Area - Cities Near Delray Beach
We serve homeowners throughout southern Palm Beach County and northern Broward, including Boca Raton, FL to the north, Deerfield Beach, FL and Pompano Beach, FL to the south, and Margate, FL inland. Every property receives the same Haven Standard: written price before work, verified crew, evidence on every job.
Serving Delray Beach, FL - Our Local Coverage Area
We’re based in the Delray Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Windows & Doors in Delray Beach
Yes, if your property is in a designated historic district like Del-Ida Park or Nassau Park. We document existing sightlines and materials for your application and specify FL-product-approved replicas that match original profiles. The board review is your process, but our specification package is built for it.
Most of Delray Beach east of I-95 is inside the windborne debris region under Palm Beach County’s Florida Building Code adoption. We verify your address against current zone maps during the measured survey and specify accordingly.
Yes, and it is common - Kings Point and similar 55-plus communities contain thousands of identical units that generate efficient bulk contracts. We schedule phased installation to minimize resident disruption and provide single-point documentation for the board.
Call (754) 600-8907 to schedule your free measured survey. The written quote is yours to keep, and it will not change.
What happens when you call
- 1A real person answersNo phone trees - talk to a local windows & doors pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Delray Beach Customers Say
"Good crew, tidy install, finished a day early. Paperwork had the license number on it."
- Barry L."Replaced eight windows. They showed me the U-factor on the units they were actually fitting rather than the brochure numbers."
- Kofi B."The road noise in the front bedroom is genuinely gone. They recommended the laminated glass and explained why, with figures."
- Delia F.